Black Epoxy Adhesives

“”

Black Epoxy Adhesive FAQs:

How can I use black epoxy glue?

If you’re in need of easy-to-use black epoxy glue, you’re in the right place. AeroMarine Products’ black epoxy is a simple epoxy adhesive that only requires a few steps to prepare and use. These steps go as follows:

1. Clean the surface where you intend to apply your black epoxy adhesive by removing dirt, dust, grime, and debris
2. Once your surfaces are clean, assemble your epoxy kit by creating a 1:1 mix ratio of epoxy resin and hardener by pouring both parts in to cups in equal volumes and then pouring both into a plastic bucket and mixing with a wooden stirrer
3. Once mixed, pour your black epoxy resin glue into a second plastic bucket and mix again to ensure the entire solution is thoroughly blended
4. After your black epoxy glue is mixed, use a paintbrush, roller, or pour it to apply your black epoxy adhesive. If you are adhering two surfaces together we recommend applying glue to both sides.
5. Finally, allow your black epoxy glue to harden and cure for a minimum of 24 hours

This epoxy glue can blush which is why it shouldn’t be used as a laminating products and should only be used in between two pieces (not exposed).